OT FIT 18/220 240/350 D CS L
Korzyści ze stosowania produktu
- Flexible current setting (DIPswitch 6 currents)
- Wysoka jakość światła dzięki niskiemu sterującemu prądowi wyjściowemu
- User flexibility with six different output currents from one driver
- Wymagania bezpieczeństwa ze względu na ochronę przed przeciążeniem, przegrzaniem, zwarciem
- Długa trwałość i niezawodność przy maksymalnych dopuszczalnych temperaturach
- Enable slim fixture design with flat 21 mm height metal housing
Obszar zastosowań
- Przeznaczony do opraw o klasie ochronności I
- Instalacja w systemach oświetlenia awaryjnego zgodnie z IEC 61347-2-13, załącznik J
- Nadaje się do instalacji w oświetleniu awaryjnym zgodnie z PN-EN 60598-2-22
Dane techniczne
Dane elektryczne
Znamionowe napięcie wejściowe
220 240 V
Częstotliwość sieciowa
0/50/60 Hz Hz
Napięcie wejściowe, prąd zmienny
198 264 V
Current set
DipSwitch
Współczynnik mocy λ
078C097
Efficiency in full-load
86 %
Straty mocy
3.08 W
Początkowy prąd rozruchowy
7.4 A
Maks. liczba SE przy bezpieczniku 10 A
40
Maksymalna liczba SE na wyłącznik 16 A
64
Odporność na nap. udarowe (L/N-uziom)
2 kV
Odporność na napięcie udarowe (L-N)
1 kV
Znamionowe napięcie wyjściowe
32...54 V
Znamionowy prąd wyjściowy
100 / 150 / 200 / 250 / 300 / 350 mA
Output PSTLM
≤1
Output SVM
≤0.4
Znamionowa moc
5...18.9 W
Maksymalna moc wyjściowa
18.9 W
Częstotliwość prądu wyj. (100 Hz)
< 3 %
Wymiary i waga
Odległość otworów montażowych, długość
200,0 mm
Masa produktu
11600 g
Przekrój przewodu, strona wejściowa
0,5 1,5 mm²
Długość przewodu, strona wejściowa
8,0 9,0 mm
Wysokość
210 mm
Długość
2100 mm
Szerokość
300 mm
Temperatury i warunki pracy
Zakres temperatury otoczenia
-25 +50 °C
Maks. temp. w punkcie pomiarowym tc
75 °C
Maks. temperatura obudowy
110 °C
Zakres temperatury magazynowania
-25 85 °C
Wilgotność względna
5 85 %
Trwałość
Trwałość SE
50000 / 100000 h
Możliwości
Ściemnianie
Nie
Zabezpieczenie przed przegrzaniem
Automatycznie odwracalne
Zabezpieczenie przeciwprzeciążeniowe
Automatycznie odwracalne
Zabezpieczenie przeciwzwarciowe
Automatycznie odwracalne
Bez zabezp. przeciwprzeciążeniowego
Tak
Intended for no-load operation
Nie
Maks. dł. przewodów do lampy/modułu LED
2,0 m
Nadaje się do opraw o kl. ochronności
I
Number of channels
1
Programming
Programming device
DIPswitch
Certyfikaty i Normy
Znaki stacji badawczych
CE / ENEC / CCC / RCM / UKCA / BIS / EAC
Normy
Wg. IEC 61347-1/Wg. IEC 61347-2-13/Wg. IEC 62384/Wg. IEC 61000-3-2/Wg. IEC 61000-3-3/Wg. IEC 61547/Wg. EN 55015
Typ zabezpieczenia
IP20
Dane logistyczne
Kod taryfy celnej
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
25-08-2023
Primary Article Identifier
4062172285254
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
f881b08b-40f0-4875-929d-51c0aa29dff9
Informacje na temat opakowania
EAN |
Jednostka |
Sztuka |
Wymiary |
Masa |
Wielkość sprzedaży |
---|---|---|---|---|---|
4062172285254 |
UNV
| 1 | 210mm x 30mm x 21mm | 116.00g | 0.13dm³ |
4062172285261 |
VS
| 20 | 237mm x 162mm x 130mm | 2629.00g | 4.99dm³ |
Materiały do pobrania
Dowiedz się więcej o rodzinie produktów
Cechy produktu
- Częstotliwość linii: 0 Hz | 50 Hz | 60 Hz
- Napięcie zasilania: 220 240 V
- Napięcie sieciowe: 198 264 V
- Wide output current range
- Trwałość: aż do 100 000 godzin (temperatura w punkcie Tc = 65 °C, maks. 10 % współczynnik uszkodzeń)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nazwa produktu |
|
|
|
|
|
Karty produktów | ||
---|---|---|---|---|---|---|---|---|
OT FIT 18/220
240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
OT FIT 40/220
240/350 D CS L
|
40 120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
OT FIT 60/220
240/350 D CS L
|
90 175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 75/220...240/550 D CS L
|
90 216 / 90 188 / 90 167 / 90 150 / 90 136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 2100 mm | 300 mm | 210 mm |