OPTOTRONIC FIT D CS L (Dip Switch) EL
Cechy produktu
- Częstotliwość linii: 0 Hz | 50 Hz | 60 Hz
- Napięcie zasilania: 220…240 V
- Napięcie sieciowe: 198…264 V
- Wide output current range
- Trwałość: aż do 100 000 godzin (temperatura w punkcie Tc = 65 °C, maks. 10 % współczynnik uszkodzeń)
Korzyści ze stosowania produktu
- Flexible current setting (DIPswitch – 6 currents)
- Wysoka jakość światła dzięki niskiemu sterującemu prądowi wyjściowemu
- User flexibility with six different output currents from one driver
- Wymagania bezpieczeństwa ze względu na ochronę przed przeciążeniem, przegrzaniem, zwarciem
- Długa trwałość i niezawodność przy maksymalnych dopuszczalnych temperaturach
- Enable slim fixture design with flat 21 mm height metal housing
Products
| Nazwa produktu |
|
|
|
|
|
Karty produktów | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 18/220…240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | ||
|
OT FIT 40/220…240/350 D CS L
|
40…120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | ||
|
|
OT FIT 60/220…240/350 D CS L
|
90…175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | ||
|
OT FIT 75/220...240/550 D CS L
|
90…216 / 90…188 / 90…167 / 90…150 / 90…136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 210,0 mm | 30,0 mm | 21,0 mm |
Dowiedz się więcej o rodzinie produktów
Obszar zastosowań
- Przeznaczony do opraw o klasie ochronności I
- Instalacja w systemach oświetlenia awaryjnego zgodnie z IEC 61347-2-13, załącznik J
- Nadaje się do instalacji w oświetleniu awaryjnym zgodnie z PN-EN 60598-2-22
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.