ELEMENT 40/220 240/350 D CS L
Dane techniczne
Dane elektryczne
Znamionowe napięcie wejściowe
220 240 V
Częstotliwość sieciowa
50/60 Hz
Napięcie wejściowe, prąd zmienny
198 264 V
Current set
DipSwitch
Współczynnik mocy λ
098
Efficiency in full-load
93 %
Straty mocy
2,6 W
Początkowy prąd rozruchowy
18 A
Maks. liczba SE przy bezpieczniku 10 A
30
Maks. liczba SE przy bezpieczniku 10 A
30
Maksymalna liczba SE na wyłącznik 16 A
48
Maksymalna liczba SE na wyłącznik 16 A
48
Odporność na nap. udarowe (L/N-uziom)
2 kV
Odporność na napięcie udarowe (L-N)
1 kV
Znamionowe napięcie wyjściowe
55 120 V
Znamionowy prąd wyjściowy
200 / 250 / 300 / 350 mA
Częstotliwość prądu wyj. (100 Hz)
< 30 %
Output PSTLM
≤1
Output SVM
≤0.4
Znamionowa moc
11...42 W
Maksymalna moc wyjściowa
42 W
Całkowite zniekształcenie harmoniczne
< 20 %
U-OUT (napięcie robocze)
< 250 V
Tolerancja prądu wyjściowego
±7.5 %
Izolacja galwaniczna
Non isolated
Default output current
350 mA
Wymiary i waga
Odległość otworów montażowych, długość
200,0 mm
Masa produktu
12600 g
Przekrój przewodu, strona wejściowa
0,5 1,5 / 0,75 1,5 mm²
Przekrój przewodu, strona wyjściowa
0,5 1,5 / 0,75 1,5 mm²
Długość przewodu, strona wejściowa
8,5 9,5 mm
Szerokość
300 mm
Długość
2100 mm
Długość przewodu, strona wyjściowa
8,5 9,5 mm
Wysokość
210 mm
Kolory i materiały
Materiał obudowy
Metal
Temperatury i warunki pracy
Zakres temperatury otoczenia
-20 +50 °C
Maks. temp. w punkcie pomiarowym tc
75 °C
Maks. temperatura obudowy
110 °C
Zakres temperatury magazynowania
-25 85 °C
Wilgotność względna
5 85 %
Trwałość
Trwałość SE
35000 / 50000 h
Temperature at the measuring point tc (°C) |
75 °C |
---|
Możliwości
Ściemnianie
Nie
Zabezpieczenie przed przegrzaniem
Automatycznie odwracalne
Zabezpieczenie przeciwprzeciążeniowe
Automatycznie odwracalne
Zabezpieczenie przeciwzwarciowe
Automatycznie odwracalne
Bez zabezp. przeciwprzeciążeniowego
Tak
Maks. dł. przewodów do lampy/modułu LED
2,0 m
Nadaje się do opraw o kl. ochronności
I
Number of channels
1
Programming
Programming device
DIPswitch
Certyfikaty i Normy
Znaki stacji badawczych
CE / ENEC 05 / EAC / CCC / BIS / RCM
Normy
Wg. IEC 61347-1/Wg. IEC 61347-2-13/Wg. IEC 62384/Wg. IEC 61000-3-2/Wg. IEC 61000-3-3/Wg. IEC 61547
Typ zabezpieczenia
IP20
Dane logistyczne
Kod taryfy celnej
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
25-04-2022
Primary Article Identifier
4052899553095
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
422ed448-15a7-465f-9d51-518e05543056
Informacje na temat opakowania
EAN |
Jednostka |
Sztuka |
Wymiary |
Masa |
Wielkość sprzedaży |
---|---|---|---|---|---|
4052899553095 |
UNV
| 1 | 210mm x 30mm x 21mm | 126.00g | 0.13dm³ |
4052899553101 |
VS
| 20 | 228mm x 138mm x 150mm | 2718.00g | 4.72dm³ |
Materiały do pobrania
Dowiedz się więcej o rodzinie produktów
Cechy produktu
- Częstotliwość linii: 50 Hz | 60 Hz
- Napięcie zasilania: 220 240 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nazwa produktu |
|
|
|
|
|
Karty produktów | ||
---|---|---|---|---|---|---|---|---|
ELEMENT 18/220
240/350 D CS L
|
25 54 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
ELEMENT 40/220
240/350 D CS L
|
55 120 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
ELEMENT 60/220
240/350 D CS L
|
90 175 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm |