OT FIT 300/220...240/1A6 D NFC IND L
Korzyści ze stosowania produktu
- Wysoka ochrona przed przepięciem: do 4 kV (L-N) / 4 kV (L/N-PE)
Obszar zastosowań
- Instalacja w systemach oświetlenia awaryjnego zgodnie z IEC 61347-2-13, załącznik J
- Nadaje się do instalacji w oświetleniu awaryjnym zgodnie z PN-EN 60598-2-22
- Przeznaczony do opraw o klasie ochronności I
Dane techniczne
Dane elektryczne
Znamionowe napięcie wejściowe
220 240 V
Częstotliwość sieciowa
0/50/60 Hz Hz
Napięcie wejściowe, prąd zmienny
198 264 V
Napięcie wejściowe, prąd stały
176 276 V
Current set
NFC / LEDset
Współczynnik mocy λ
0,69C 0,99
Efficiency in full-load
96 %
Straty mocy
16 W
Początkowy prąd rozruchowy
≤ 6 A
Maks. liczba SE przy bezpieczniku 10 A
7
Maks. liczba SE przy bezpieczniku 10 A
7
Maksymalna liczba SE na wyłącznik 16 A
11
Maksymalna liczba SE na wyłącznik 16 A
11
Maks. liczba SE przy bezpieczni 25 A (B)
17
Odporność na nap. udarowe (L/N-uziom)
4 kV
Odporność na napięcie udarowe (L-N)
4 kV
Znamionowe napięcie wyjściowe
60 300 V
Znamionowy prąd wyjściowy
250...1550 mA
Default output current
250 mA
Częstotliwość prądu wyj. (100 Hz)
≤ 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Znamionowa moc
40 300 W
Maksymalna moc wyjściowa
300 W
Izolacja galwaniczna
Non isolated
Całkowite zniekształcenie harmoniczne
7 %
Wymiary i waga
Odległość otworów montażowych, długość
340.0 mm
Masa produktu
450,00 g
Przekrój przewodu, strona wejściowa
0,5 1,5 mm²
Przekrój przewodu, strona wyjściowa
0,5 1,5 mm²
Długość przewodu, strona wejściowa
8,5 9,5 mm
Długość przewodu, strona wyjściowa
8,5 9,5 mm
Długość
360,0 mm
Wysokość
28,0 mm
Szerokość
46,0 mm
Kolory i materiały
Materiał obudowy
Metal
Temperatury i warunki pracy
Zakres temperatury otoczenia
-40 +65 °C
Maks. temp. w punkcie pomiarowym tc
85 °C
Maks. temperatura obudowy
110 °C
Zakres temperatury magazynowania
-40 +85 °C
Wilgotność względna
5 85 %
Trwałość
Trwałość SE
100000 h
Dodatkowe dane produktu
Obudowa (z domieszkami)
Nie
Możliwości
Ściemnianie
Nie
Zabezpieczenie przed przegrzaniem
Automatycznie odwracalne
Zabezpieczenie przeciwprzeciążeniowe
Automatycznie odwracalne
Zabezpieczenie przeciwzwarciowe
Automatycznie odwracalne
Bez zabezp. przeciwprzeciążeniowego
Tak
Intended for no-load operation
Nie
Maks. dł. przewodów do lampy/modułu LED
3,0 m
Nadaje się do opraw o kl. ochronności
I
Number of channels
1
Detection angle (Light sensor)
-
Detection angle (PIR)
-
Control interface
-
Nadaje się do oświetlenia awaryjnego
Tak
Programming
Tuner4TRONIC Field App
Tak
Programming device
FEIG
Box programming
Yes
Tuner4TRONIC
Tak
Certyfikaty i Normy
Znaki stacji badawczych
CE / VDE-ENEC / EAC / CCC / BIS / RCM
Normy
Wg. IEC 61347-1/Wg. IEC 61347-2-13/Wg. IEC 62384/Acc. to IEC 62386/Wg. IEC 61000-3-2/Wg. IEC 61000-3-3/Wg. IEC 61547
Typ zabezpieczenia
IP20
Dane logistyczne
Kod taryfy celnej
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
04-10-2023
Primary Article Identifier
4062172186179
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
5eb2261f-bc3b-4e13-bfa0-573aa1f260d7
Informacje na temat opakowania
EAN |
Jednostka |
Sztuka |
Wymiary |
Masa |
Wielkość sprzedaży |
---|---|---|---|---|---|
4062172186179 |
UNV
| 1 | 360mm x 46mm x 28mm | 450.00g | 0.46dm³ |
4062172186186 |
VS
| 10 | 385mm x 152mm x 107mm | 4655.00g | 6.26dm³ |
Materiały do pobrania
Dowiedz się więcej o rodzinie produktów
Cechy produktu
- Częstotliwość linii: 0 Hz | 50 Hz | 60 Hz
- Versatile scope of application due to output power range of up to 300 W
- Napięcie zasilania: 220 240 V
- Available with output current range: up to 1,600 mA
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Nazwa produktu |
|
|
|
|
|
Karty produktów | ||
---|---|---|---|---|---|---|---|---|
OT FIT 75/220...240/550 D NFC IND L
|
64 300 V | 125 550 mA | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 100/220
240/700 D NFC IND L
|
64 300 V | 200 700 mA | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 150/220
240/1A0 D NFC IND L
|
64 300 V | 250 1000 mA | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 300/220...240/1A6 D NFC IND L
|
60 300 V | 250...1550 mA | 360,0 mm | 46,0 mm | 28,0 mm |